Interfacing PIC Bracket – ROUND Hole:

Allows easy attachment between the FloatBricks dock and a fixed jetty or floating pontoon bracket. Round hole PIC brackets are installed at the bow end and slotted hole brackets towards the stern of the FloatBricks dock.

Prices are for each bracket.

High Rise Galvanised Fixed Jetty Bracket:

Galvanised High Rise Bracket for attaching FloatBricks to the top deck of a fixed jetty in an area which is affected by high tides or flooding. (not suitable for all types of jetties) – includes nuts and bolts required for installation.

Price is per bracket HDPE interfacing PIC bracket is not included and should be ordered separately.

Galvanised Vertical Bracket:

Galvanised vertical bracket to attach to the fascia of a fixed jetty or floating pontoon Includes nuts and bolts required for installation.

HDPE interfacing PIC bracket is not included and should be ordered separately.

Price is per bracket..

FloatBricks Wind on Winch – Small Kit:

A budget friendly winch system ideal for most jet skis and small tinnies. Drive onto your FloatBricks dock, and use the winch to pull your vessel up the rest of the way. (Max. vessel weight 400kg)

FloatBricks Jetski Easy Off Wind Back Kit:

Designed to help slide your jetski off the dock and can be connected to the small winch kit to make launching even easier.

Price is per bracket HDPE interfacing PIC bracket is not included and should be ordered separately.

FloatBricks Electric Winch System (wind on and off):

Remote operation via a hand held pendant connected by cable to the winch. Designed for watercraft of over 1,000kg . Allows the operator to winch the boat further onto the FloatBricks dock and includes a wind back system to assist with reversing the boat back off the dock. Easy and safe to launch or retrieve your vessel! (requires 240V)
.

Standard Brick:

The standard brick is the main FloatBricks component and can be connected to the V brick, the U brick and the Entry brick.

Use the Standard brick to build any kind of floating platform, walkway or dock system. Order the standard brick per unit to extend your existing platform.

The standard brick measures 0.5m L x 0.5 m W x 0.4m H

V Brick:

Dimensions – 0.5m x 0.5m x 0.4m (L x W x H)

The V brick is perfect to dry dock small jet skis and light boats like tinnies or small inflatables.

U Brick:

The U brick dimensions are 1.0m x 0.5. (W X L)

The U brick is the most popular docking brick. Perfect to dry dock any kind of watercrafts that can fit on your FloatBricks platform.

Low Profile Access Brick:

The access brick measures 1.0m x 0.5m. (W x L). It’s designed to have a lower profile and is used at the drive on section of your dock for easy access.

Storage Brick:  

The FloatBricks Storage Brick is a great addition your system, ideal to store away your Jet Ski cover or other items. The storage brick measures 0.5 x 0.5 metre and usually replaces a standard brick on your dock.

Fender (1 metre):

HDPE fender attaches to the outside tabs of the Floatbricks, giving a neat and rounded surface to moor the vessel against and is 1.0m L.

Can be added later as an option if required.

Handrail Stanchion (Galv):

Interfaces to the outside tabs of the FloatBricks and are normally spaced every 1.0m. Does not include rope for railings.

Assembly Tool:

Are you planning to assemble a FloatBricks platform yourself? The assembly tool is the only tool you.

Short Pin:

The short pin is used to join the U Bricks to the standard bricks, or to link standard bricks together. They are included in the price of the any of the systems but can be bought separately if spares are required.

V Float Pin:

V-Float pin is required to join the low profile access brick to the standard FloatBrick. It is also used to join V-brick systems together. They are included in the price of the any of the systems but can be bought separately if spares are required.

Single Spacer:

Single spacer is used to inconjunction with the nut and bolt to join the FloatBricks tabs together. They are included in the price of the any of the systems but can be bought separately if spares are required.

Double Spacer:

Double spacer is used to inconjunction with the nut and bolt to join the FloatBricks tabs together. They are included in the price of the any of the systems but can be bought separately if spares are required.

Rope:

3 Strand black braided rope to secure your dock to the pontoon. Price is per meter.

Stabilisation System:

The stabilisation system is critical to the long term structural integrity of your FloatBricks dock. Prevents bowing of the dock over time due to the weight of the boat. All docks 3m wide require a minimum of one unit, for docks with boats over 1,000kg it is recommended to use 2 units.